![]() The first thing the Smart Camera app will echo back over the UART when using Ethernet to stream the video feed is the IP address, port number, and channel name of the RTSP feed. sudo smartcam -usb 0 -W 1920 -H 1080 -r 30 -target dp The rtsp option passed after the -target flag tells the Smart Camera app to send the video feed over the Ethernet cable, if you're using an external monitor with an HDMI cable, pass dp and the option to target instead. sudo smartcam -usb 0 -W 1920 -H 1080 -r 30 -target rtsp Run the Smart Camera App targeting the wired Ethernet connection and specifying the USB device number of the webcam (use the -mipi flag instead of the -usb flag if using a camera via the MIPI connector). The Smart Camera app is controlled with the smartcam command. The SD card I received in the basic accessory pack for the Kria was blank, for those to note that also purchase the basic accessory pack.Įach accelerated app will have its own set of commands to control it that will become available one the app is installed and loaded. Since the large majority of the peripherals that the device tree in Linux is expecting to see live on this baseboard, the Linux image would not work properly on the Kria with a different baseboard.ĭownload the Linux image and use an imaging tool such as balenaEtcher to program it onto a class 10 SD card at least 16GB in size. I say specifically to the KV260 board because the Kria SoM itself can live on other baseboards, but the KV260 is the combination of the Kria SoM with this particular baseboard. On the Getting Started portal for the Kria KV260, there is a link to download the embedded Linux image for the KV260 specifically. Xilinx also has all of these items bundled together in an optional accessory pack to purchase with the Kria if you don't already have everything. We recommend checking the downloaded files with any free antivirus. The most popular version among the program users is 1.5. We cannot confirm if there is a free download of this software available. ![]() A USB or MIPI camera is needed as well, along with a micro-USB cable, Ethernet cable, and microSD card.Īn HDMI cable is recommended but not necessary for the basic Smart Camera application as streaming the video feed over wired Ethernet via real-time streaming protocol is an option. Balena Etcher 1.5.60 was available to download from the developer's website when we last checked. If you don't already have one, it can be bought alongside the purchase of the starter kit here. First, add commands to turn off power management, screen blanking and screen saving. It requires a 12V barrel jack power supply. As far as i can see there are a lot of people that experienced this for various reasons behind the scene. Today i tried it again and it’s still same. The Kria KV260 development starter kit ships with the Kria SoM mounted on a baseboard with peripherals including USB 3.0, Ethernet, HDMI, PMOD, etc. Hi i have first downloaded Etcher a few years ago and it was starting with a blank screen.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |